[Skyeye-developer] 主机和虚拟网络通信

[Ray Chen]

问题解决，就是route add default gw 10.0.0.1



在 2008-04-06日的 11:48 +0800，gavin fang写道：
> 2008/4/5 Ray Chen <chenrano2002 at 163.com>:
> > 我在fedora8环境下编译linux kernel 2.6.14。 initrd.img 用的是
> >  skyeye-testsuite-2.3/linux/s3c2410/s3c2410x-2.6.14/initrd.img
> >  用skyeye1.2.4模拟s3c2410运行。
> >
> >  参考文档：http://www.linuxfans.org/bbs/thread-182384-1-1.html
> >
> >  现在skyeye已经成功运行。在主机fedora8下面运行ifconfig
> >  [ray at localhost s3c2410]$ ifconfig
> >  eth134    Link encap:Ethernet  HWaddr 00:00:6C:D8:F4:FB
> >           inet addr:192.168.0.132  Bcast:192.168.0.255
> >  Mask:255.255.255.0
> >           inet6 addr: fe80::200:6cff:fed8:f4fb/64 Scope:Link
> >           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >           RX packets:9855 errors:0 dropped:0 overruns:0 frame:0
> >           TX packets:10592 errors:0 dropped:0 overruns:0 carrier:0
> >           collisions:0 txqueuelen:1000
> >           RX bytes:7382301 (7.0 MiB)  TX bytes:1527025 (1.4 MiB)
> >           Interrupt:220 Base address:0x2000
> >
> >  lo        Link encap:Local Loopback
> >           inet addr:127.0.0.1  Mask:255.0.0.0
> >           inet6 addr: ::1/128 Scope:Host
> >           UP LOOPBACK RUNNING  MTU:16436  Metric:1
> >           RX packets:9646 errors:0 dropped:0 overruns:0 frame:0
> >           TX packets:9646 errors:0 dropped:0 overruns:0 carrier:0
> >           collisions:0 txqueuelen:0
> >           RX bytes:3061492 (2.9 MiB)  TX bytes:3061492 (2.9 MiB)
> >
> >  tap0      Link encap:Ethernet  HWaddr 00:FF:A1:02:77:72
> >           inet addr:10.0.0.1  Bcast:10.255.255.255  Mask:255.0.0.0
> >           inet6 addr: fe80::2ff:a1ff:fe02:7772/64 Scope:Link
> >           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> >           TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
> >           collisions:0 txqueuelen:500
> >           RX bytes:0 (0.0 b)  TX bytes:90 (90.0 b)
> >
> >  然后skyeye下运行ifconfig
> >  / $ ifconfig
> >  eth0      Link encap:Ethernet  HWaddr 08:00:3E:26:0A:5B
> >           inet addr:10.0.0.2  Bcast:10.255.255.255  Mask:255.0.0.0
> >           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> >           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> >           collisions:0 txqueuelen:1000
> >           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
> >           Interrupt:53 Base address:0x300
> >
> >  lo        Link encap:Local Loopback
> >           inet addr:127.0.0.1  Mask:255.0.0.0
> >           UP LOOPBACK RUNNING  MTU:16436  Metric:1
> >           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> >           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> >           collisions:0 txqueuelen:0
> >           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
> >
> >
> >  我在fedora8下面可以ping通虚拟网卡eth0(10.0.0.2),但是反过来在skyeye虚拟环
> >  境下ping不通
> >  eth134(192.168.0.132). 主机如何和skyeye用过TCP/IP通信？？？？？？
> >
> >  有人说增加一条  destination 192.168.0.132 nexthop 10.0.0.1的路由，具体命
> >  令怎么写？？？？
> 
> try following on skyeye 's shell:
> 
> route add default gw 10.0.0.1
> 
> 
> >
> >
> >
> >
> >
> >  _______________________________________________
> >  CLinux.org Websites:
> >  http://seohelper.cn/
> >  http://www.implight.net/
> >  http://gro.clinux.org/
> >  Skyeye-developer mailing list
> >  Skyeye-developer at lists.gro.clinux.org
> >  http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
> >
> _______________________________________________
> CLinux.org Websites:
> http://seohelper.cn/
> http://www.implight.net/
> http://gro.clinux.org/
> Skyeye-developer mailing list
> Skyeye-developer at lists.gro.clinux.org
> http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer