[Skyeye-developer] Bug Report

[Qiang Wang]

I used the skyeye.conf as below.
and I changed to the skyeye-1.2.4.
but the skyeye will stop after some instructions.
and skyeye-1.2.3 is ok.

i think there is some mistake on skyeye.
i try to find it ,but got no result.

best

wangqiang

#skyeye config file sample
cpu: arm7tdmi
mach: lpc2210 #ZLG EasyARM2000

# SRAM Outside Chip begin: 0 ,size: 32Byte ,redirected from
0x80000000,copied by code
mem_bank: map=M, type=RW,  addr=0x00000000, size=0x00000032

# SRAM Inside Chip begin:1GB ,size:16KB
mem_bank: map=M, type=RW, addr=0x40000000, size=0x00004000

# SRAM Outside Chip begin: 2G ,size: 512KB
mem_bank: map=M, type=RW,  addr=0x80000000, size=0x00080000


# Flash ROM Outside of Chip begin: 2G+16MB size : 2MB
mem_bank: map=M, type=R, addr=0x81000000, size=0x00200000

                     #         IO Map       #
#VPB begin: 3.5GB ,size: 2M
mem_bank: map=I, type=RW, addr=0xE0000000, size=0x00200000

#AHB begin: 4GB - 2M, size: 2M
mem_bank: map=I, type=RW, addr=0xFFE00000, size=0x00200000

                     #           LOG        #
log: logon=2, logfile=./sk1.log, start=0, end=200000

net: state=on, type=rtl8019, mac=0:4:3:2:1:f, ethmod=tuntap, hostip=
192.168.11.3
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.gro.clinux.org/pipermail/skyeye-developer/attachments/20071125/4933129f/attachment.htm