[Skyeye-developer] skyeye 1.2.4 on MacOS X PPC 10.4.10 tiger
Datu
daturaster at googlemail.com
Sun Nov 11 17:34:19 CST 2007
Hi Michael,
I understand that, but I did not mean this error I mean the end of output:
--------------------------------------------
......
integrator
armv3
armv4
896;disassemble:(0,43),17248,32;trap:(0,73),17280,32;tea_break_addr:(0,73),17312,32;tea_break_ok:(0,73),17344,32;tea_pc:(0,43),17376,32;abort_model:(0,43),17408,32;tb_now:(0,18),17440,32;tea_reg_fd:(0,74),17472,32;cpu:(0,75),17504,32;mem_bank:(0,76),17536,32;vector_remap_flag:(0,43),17568,32;vector_remap_addr:(0,73),17600,32;vector_remap_size:(0,73),17632,32;;
Bus error
---------------------------------------
end of output
at my linux machine, it did not output the above "Bus error" but like below:
......
integrator
-------- BlackFin architectures ----
bf533
Maybe it doesn't support blackfin at ppc macosx?
On 11/11/2007, Michael. Kang <blackfin.kang at gmail.com> wrote:
> Just like the hints of your error message:
>
> Failed to open skyeye config file skyeye.conf in the same directory
>
> You need a skyeye.conf file that can config the simulation machine.
> You can get a skyeye.conf from our testsuite package.
> Or try some quick guide in the URL:http://skyeye.wiki.sourceforge.net/
>
> -- Thanks
> -- MK
>
> On 11/10/07, Datu <daturaster at googlemail.com> wrote:
> > Hi All,
> >
> > I test compiling skyeye 1.2.4 on macos x tiger Powerpc:
> >
> > same error as before
> > In file included from /usr/include/libkern/OSByteOrder.h:52,
> > from /usr/include/sys/_endian.h:89,
> > from /usr/include/ppc/endian.h:107,
> > from /usr/include/machine/endian.h:30,
> > from /usr/include/sys/wait.h:182,
> > from /usr/include/stdlib.h:64,
> > from arch/arm/common/armdefs.h:22,
> > from utils/config/skyeye_config.h:33,
> > from device/skyeye_device.c:28:
> > /usr/include/libkern/ppc/OSByteOrder.h: In function 'OSReadSwapInt64':
> > /usr/include/libkern/ppc/OSByteOrder.h:81: error: two or more data types in
> > declaration specifiers
> > /usr/include/libkern/ppc/OSByteOrder.h:81: error: two or more data types in
> > declaration specifiers
> > /usr/include/libkern/ppc/OSByteOrder.h:81: error: two or more data types in
> > declaration specifiers
> > /usr/include/libkern/ppc/OSByteOrder.h:82: error: two or more data types in
> > declaration specifiers
> > /usr/include/libkern/ppc/OSByteOrder.h:82: error: two or more data types in
> > declaration specifiers
> > /usr/include/libkern/ppc/OSByteOrder.h:82: error: parse error before '['
> > token
> > /usr/include/libkern/ppc/OSByteOrder.h: At top level:
> > /usr/include/libkern/ppc/OSByteOrder.h:87: error: parse error before ':'
> > token
> > make: *** [binary/skyeye_device.o] Error 1
> >
> > However, I added the patch provided by Malcolm Purvis :
> > http://lists.gro.clinux.org/pipermail/skyeye-developer/2007-November/001611.html
> >
> > And compiled skyeye with "$ make NO_DBCT=1 NO_BFD=1 "
> > It works with successfully created skyeye binary.
> >
> > but when I run skyeye I get the following Bus error:
> >
> > ./skyeye
> >
> > **************************** WARNING **********************************
> > If you want to run ELF image, you should use -e option to indicate
> > your elf-format image filename. Or you only want to run binary image,
> > you need to set the filename of the image and its entry in skyeye.conf.
> > ***********************************************************************
> >
> > big_endian is false.
> > Failed to open skyeye config file skyeye.conf in the same directory
> > error: No such file or directory
> > ------------------------- SkyEye -V1.2 ---------------------------
> > Usage: SkyEye [options] -e program [program args]
> > Default mode is STANDALONE mode
> > ------------------------------------------------------------------
> > Options:
> > -e exec-file the (ELF executable format)kernel file name.
> > -l load_address,load_address_mask
> > Load ELF file to another address, not its entry.
> > -b specify the data type is big endian when non "-e" option.
> > -d in GDB Server mode (can be connected by GDB).
> > -c config-file the skyeye configure file name.
> > -h The SkyEye command options, and ARCHs and CPUs simulated.
> > ------------------------------------------------------------------
> > ----------- Architectures and CPUs simulated by SkyEye-------------
> > -------- ARM architectures ---------
> > at91
> > lpc
> > s3c4510b
> > s3c44b0x
> > s3c44b0
> > s3c3410x
> > ep7312
> > lh79520
> > ep9312
> > cs89712
> > sa1100
> > pxa_lubbock
> > pxa_mainstone
> > at91rm92
> > s3c2410x
> > s3c2440
> > sharp_lh7a400
> > ns9750
> > lpc2210
> > ps7500
> > imx
> > integrator
> > armv3
> > armv4
> > 896;disassemble:(0,43),17248,32;trap:(0,73),17280,32;tea_break_addr:(0,73),17312,32;tea_break_ok:(0,73),17344,32;tea_pc:(0,43),17376,32;abort_model:(0,43),17408,32;tb_now:(0,18),17440,32;tea_reg_fd:(0,74),17472,32;cpu:(0,75),17504,32;mem_bank:(0,76),17536,32;vector_remap_flag:(0,43),17568,32;vector_remap_addr:(0,73),17600,32;vector_remap_size:(0,73),17632,32;;
> > Bus error
> >
> > Anyone has any clue?
> >
> > many thanks
> >
> > datu
> >
> > _______________________________________________
> > CLinux.org Websites:
> > http://seohelper.cn/
> > http://www.implight.net/
> > http://gro.clinux.org/
> > Skyeye-developer mailing list
> > Skyeye-developer at lists.gro.clinux.org
> > http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
> >
>
>
> --
> www.skyeye.org
>
> _______________________________________________
> CLinux.org Websites:
> http://seohelper.cn/
> http://www.implight.net/
> http://gro.clinux.org/
> Skyeye-developer mailing list
> Skyeye-developer at lists.gro.clinux.org
> http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
>
More information about the Skyeye-developer
mailing list