[Skyeye-developer] skyeye 1.2.4 on MacOS X PPC 10.4.10 tiger

[Michael.Kang]

Just like the hints of your error message:

          Failed to open skyeye config file skyeye.conf in the same directory

You need a skyeye.conf file that can config the simulation machine.
You can get a skyeye.conf from our testsuite package.
        Or try some quick guide in the URL:http://skyeye.wiki.sourceforge.net/

-- Thanks
-- MK

On 11/10/07, Datu <daturaster at googlemail.com> wrote:
> Hi All,
>
> I test compiling skyeye 1.2.4 on macos x tiger Powerpc:
>
> same error as before
> In file included from /usr/include/libkern/OSByteOrder.h:52,
>                  from /usr/include/sys/_endian.h:89,
>                  from /usr/include/ppc/endian.h:107,
>                  from /usr/include/machine/endian.h:30,
>                  from /usr/include/sys/wait.h:182,
>                  from /usr/include/stdlib.h:64,
>                  from arch/arm/common/armdefs.h:22,
>                  from utils/config/skyeye_config.h:33,
>                  from device/skyeye_device.c:28:
> /usr/include/libkern/ppc/OSByteOrder.h: In function 'OSReadSwapInt64':
> /usr/include/libkern/ppc/OSByteOrder.h:81: error: two or more data types in
> declaration specifiers
> /usr/include/libkern/ppc/OSByteOrder.h:81: error: two or more data types in
> declaration specifiers
> /usr/include/libkern/ppc/OSByteOrder.h:81: error: two or more data types in
> declaration specifiers
> /usr/include/libkern/ppc/OSByteOrder.h:82: error: two or more data types in
> declaration specifiers
> /usr/include/libkern/ppc/OSByteOrder.h:82: error: two or more data types in
> declaration specifiers
> /usr/include/libkern/ppc/OSByteOrder.h:82: error: parse error before '['
> token
> /usr/include/libkern/ppc/OSByteOrder.h: At top level:
> /usr/include/libkern/ppc/OSByteOrder.h:87: error: parse error before ':'
> token
> make: *** [binary/skyeye_device.o] Error 1
>
> However, I added the patch provided by Malcolm Purvis :
> http://lists.gro.clinux.org/pipermail/skyeye-developer/2007-November/001611.html
>
> And compiled skyeye with "$ make NO_DBCT=1 NO_BFD=1 "
> It works with successfully created skyeye binary.
>
> but when I run skyeye I get the following Bus error:
>
> ./skyeye
>
> **************************** WARNING **********************************
> If you want to run ELF image, you should use -e option to indicate
> your elf-format image filename. Or you only want to run binary image,
> you need to set the filename of the image and its entry in skyeye.conf.
> ***********************************************************************
>
> big_endian is false.
> Failed to open skyeye config file skyeye.conf in the same directory
> error: No such file or directory
> ------------------------- SkyEye -V1.2 ---------------------------
> Usage: SkyEye [options] -e program [program args]
> Default mode is STANDALONE mode
> ------------------------------------------------------------------
> Options:
> -e exec-file        the (ELF executable format)kernel file name.
> -l load_address,load_address_mask
>                     Load ELF file to another address, not its entry.
> -b                  specify the data type is big endian when non "-e" option.
> -d                  in GDB Server mode (can be connected by GDB).
> -c config-file      the skyeye configure file name.
> -h                  The SkyEye command options, and ARCHs and CPUs simulated.
> ------------------------------------------------------------------
> ----------- Architectures and CPUs simulated by SkyEye-------------
> -------- ARM architectures ---------
> at91
> lpc
> s3c4510b
> s3c44b0x
> s3c44b0
> s3c3410x
> ep7312
> lh79520
> ep9312
> cs89712
> sa1100
> pxa_lubbock
> pxa_mainstone
> at91rm92
> s3c2410x
> s3c2440
> sharp_lh7a400
> ns9750
> lpc2210
> ps7500
> imx
> integrator
> armv3
> armv4
> 896;disassemble:(0,43),17248,32;trap:(0,73),17280,32;tea_break_addr:(0,73),17312,32;tea_break_ok:(0,73),17344,32;tea_pc:(0,43),17376,32;abort_model:(0,43),17408,32;tb_now:(0,18),17440,32;tea_reg_fd:(0,74),17472,32;cpu:(0,75),17504,32;mem_bank:(0,76),17536,32;vector_remap_flag:(0,43),17568,32;vector_remap_addr:(0,73),17600,32;vector_remap_size:(0,73),17632,32;;
> Bus error
>
> Anyone has any clue?
>
> many thanks
>
> datu
>
> _______________________________________________
> CLinux.org Websites:
> http://seohelper.cn/
> http://www.implight.net/
> http://gro.clinux.org/
> Skyeye-developer mailing list
> Skyeye-developer at lists.gro.clinux.org
> http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
>


-- 
www.skyeye.org