[Skyeye-developer] MacOS X PPC 10.4.10 tiger support?
Datu
daturaster at googlemail.com
Fri Nov 9 07:26:29 CST 2007
Hi Marc and Lee,
I tried compile skyeye latest trunk (with your two mac patches) in my Mac
osx ppc machine. I got the following errors:
gcc -c device/skyeye_device.c -o binary/skyeye_device.o -g -O2
-D_FILE_OFFSET_BI
TS=64 -DSTANDALONE -DDEFAULT_INLINE=0 -DMODET -DHOST_IS_BIG_ENDIAN -DMODET
-I a
rch/arm -I arch/arm/common -I arch/arm/common/mmu -I arch/arm/mach -I
arch/bfin/
common -I arch/bfin/mach -I arch/coldfire/common -I arch/ppc/common -I
device -I
device/net -I device/lcd -I device/flash -I device/uart -I device/nandflash
-I
utils -I utils/share -I utils/main -I utils/config -I utils/debugger -DARM
-I.
-DNO_DBCT -DNO_BFD -DNO_LCD
In file included from /usr/include/libkern/OSByteOrder.h:52,
from /usr/include/sys/_endian.h:89,
from /usr/include/ppc/endian.h:107,
from /usr/include/machine/endian.h:30,
from /usr/include/sys/wait.h:182,
from /usr/include/stdlib.h:64,
from arch/arm/common/armdefs.h:22,
from utils/config/skyeye_config.h:33,
from device/skyeye_device.c:28:
/usr/include/libkern/ppc/OSByteOrder.h: In function 'OSReadSwapInt64':
/usr/include/libkern/ppc/OSByteOrder.h:81: error: two or more data types in
declaration specifiers
/usr/include/libkern/ppc/OSByteOrder.h:81: error: two or more data types in
declaration specifiers
/usr/include/libkern/ppc/OSByteOrder.h:81: error: two or more data types in
declaration specifiers
/usr/include/libkern/ppc/OSByteOrder.h:82: error: two or more data types in
declaration specifiers
/usr/include/libkern/ppc/OSByteOrder.h:82: error: two or more data types in
declaration specifiers
/usr/include/libkern/ppc/OSByteOrder.h:82: error: parse error before '['
token
/usr/include/libkern/ppc/OSByteOrder.h: At top level:
/usr/include/libkern/ppc/OSByteOrder.h:87: error: parse error before ':'
token
make: *** [binary/skyeye_device.o] Error 1
Does your patches only support MacOSX x86 version?
Skyeye was once compiled under macos x ppc before, I searched web:
http://lists.gro.clinux.org/pipermail/skyeye-developer/2007-April/001210.html
but why it doesn't support now? anyone can help to fix it.
Many thanks
datu
On 08/11/2007, Anthony Lee <don.anthony.lee at gmail.com> wrote:
>
> Hi Marc,
>
> Though DBCT module of SkyEye could compiled on Mac OSX.
> but I catch an error below shown some problem that I didn't solve yet,
> I'll try to find out what's the problem once I'm free. :)
>
> ------------- GDB output -------------
> Program received signal EXC_BAD_ACCESS, Could not access memory.
> Reason: KERN_PROTECTION_FAILURE at address: 0x0003e30a
> 0x0003df37 in handle_v6_insn (state=0x0, instr=0) at
> arch/arm/common/armemu.c:5771
> (gdb) bt
> #0 0x0003df37 in handle_v6_insn (state=0x0, instr=0) at
> arch/arm/common/armemu.c:5771
> #1 0x00000000 in ?? ()
> Cannot access memory at address 0x3
> Previous frame inner to this frame (corrupt stack?)
> --------------------------------------------
>
> Then SkyEye quited and throw out a message "Bus error" !!!
>
>
> On Nov 8, 2007 2:43 PM, Marc Hoffman <mmhoffm at gmail.com> wrote:
> > Does this make sense to add to the makefile so you can just type make?
> >
> > _______________________________________________
> > CLinux.org Websites:
> > http://seohelper.cn/
> > http://www.implight.net/
> > http://gro.clinux.org/
> > Skyeye-developer mailing list
> > Skyeye-developer at lists.gro.clinux.org
> > http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
> >
> >
>
> _______________________________________________
> CLinux.org Websites:
> http://seohelper.cn/
> http://www.implight.net/
> http://gro.clinux.org/
> Skyeye-developer mailing list
> Skyeye-developer at lists.gro.clinux.org
> http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.gro.clinux.org/pipermail/skyeye-developer/attachments/20071108/4189fe49/attachment.htm
More information about the Skyeye-developer
mailing list