[Skyeye-developer] Problems with testsuite-2.2 for at91rm9200

[Jesus Lopez]

Hi,
Thanks a million. I've downloaded skyeye-1.2.2, compiled it and now
testsuite runs perfectly. Cheers.
One more question, what changes should I make to the source code in order to
compile my own kernel? I've followed these steps (
http://lists.gro.clinux.org/pipermail/skyeye-developer/2006-November/001052.html)
and I've modified PHYS_OFFSET and kernel command line but kernel doesn't
boot:
desktop-linux:~/arm9/misc/skyeye/skyeye-testsuite-2.2/linux/at91rm9200/2.6.x#
skyeye -e myvmlinux -c skyeye.conf
arch: arm
cpu info: armv4, arm920t, 41009200, ff00fff0, 2
mach info: name at91rm92, mach_init addr 0x805b720
uart_mod:0, desc_in:, desc_out:
SKYEYE: use arm920t mmu ops
Loaded RAM   ./initrd.img
exec file "myvmlinux"'s format is elf32-little.
load section .init: addr = 0xc0008000  size = 0x00017000.
load section .text: addr = 0xc001f000  size = 0x00176a0c.
not load section .pci_fixup: addr = 0xc0195a0c  size = 0x00000000 .
load section __ksymtab: addr = 0xc0195a0c  size = 0x00003668.
load section __ksymtab_gpl: addr = 0xc0199074  size = 0x000007d8.
not load section __kcrctab: addr = 0xc019984c  size = 0x00000000 .
not load section __kcrctab_gpl: addr = 0xc019984c  size = 0x00000000 .
load section __ksymtab_strings: addr = 0xc019984c  size = 0x00008a34.
load section __param: addr = 0xc01a2280  size = 0x000001a4.
load section .data: addr = 0xc01a4000  size = 0x0003cae0.
not load section .bss: addr = 0xc01e0ae0  size = 0x0001987c .
not load section .comment: addr = 0x00000000  size = 0x00001c44 .
start addr is set to 0xc0008000 by exec file.

and hangs there.

Thanks.

On 7/17/07, Michael. Kang <blackfin.kang at gmail.com> wrote:
>
> Hi:
>              skyeye-1.2.3 is broekn for at91rm9200 of testsuite-2.2 in
> somewhere. Probably I can give the patch against in the following day.
> You can firstly try skyeye-1.2.2 version, that can run at91rm9200
> testcase now.
>
> -- Thanks
> -- Michael.Kang
>
> On 7/17/07, Jesus Lopez <jesus.jelomer at gmail.com> wrote:
> > Hello,
> >
> > I'm new to skyeye. I'm trying to run the example in
> > skyeye-testsuite-2.2/linux/at91rm9200/2.6.x/ but kernel doesn't boot and
> it
> > shows hundreds of errors:
> >
> > desktop-linux:~/arm9/misc/skyeye/skyeye-
> > testsuite-2.2/linux/at91rm9200/2.6.x# skyeye -e vmlinux -c skyeye.conf
> > arch: arm
> > cpu info: armv4, arm920t, 41009200, ff00fff0, 2
> > mach info: name at91rm92, mach_init addr 0x80682b0
> > uart_mod:0, desc_in:, desc_out:, converter:
> > SKYEYE: use arm920t mmu ops
> > Loaded RAM   ./initrd.img
> > exec file "vmlinux"'s format is elf32-little.
> > load section .init: addr = 0xc0008000  size = 0x00018000.
> > load section .text: addr = 0xc0020000  size = 0x0013e14c.
> > load section __ex_table: addr = 0xc015e150  size = 0x000009f8.
> > not load section .pci_fixup: addr = 0xc015eb48  size = 0x00000000 .
> > not load section __ksymtab: addr = 0xc015eb48  size = 0x00000000 .
> > not load section __ksymtab_gpl: addr = 0xc015eb48  size = 0x00000000 .
> > not load section __kcrctab: addr = 0xc015eb48  size = 0x00000000 .
> > not load section __kcrctab_gpl: addr = 0xc015eb48  size = 0x00000000 .
> > load section __param: addr = 0xc015eb48  size = 0x00000078.
> > load section .data: addr = 0xc0160000  size = 0x00027bd0.
> > not load section .bss: addr = 0xc0187be0  size = 0x00012ba8 .
> > not load section .comment: addr = 0x00000000  size = 0x0000188a .
> > not load section .debug_abbrev: addr = 0x00000000  size = 0x0005b24d .
> > not load section .debug_info: addr = 0x00000000  size = 0x00fd0eab .
> > not load section .debug_line: addr = 0x00000000  size = 0x000cb75e .
> > not load section .debug_pubnames: addr = 0x00000000  size = 0x00011cdf .
> > not load section .debug_str: addr = 0x00000000  size = 0x00042d28 .
> >  not load section .debug_aranges: addr = 0x00000000  size = 0x00003820 .
> > not load section .debug_frame: addr = 0x00000000  size = 0x00035044 .
> > not load section .debug_ranges: addr = 0x00000000  size = 0x00009b08 .
> >  start addr is set to 0xc0008000 by exec file.
> > in at91rm92_uart_read, io error, offset=0xfffc0014
> > in at91rm92_uart_read, io error, offset=0xfffc0014
> > in at91rm92_uart_read, io error, offset=0xfffc0014
> > in at91rm92_uart_read, io error, offset=0xfffc0014
> > in at91rm92_uart_read, io error, offset=0xfffc0014
> > in at91rm92_uart_read, io error, offset=0xfffc0014
> > in at91rm92_uart_read, io error, offset=0xfffc0014
> > in at91rm92_uart_read, io error, offset=0xfffc0014
> > in at91rm92_uart_read, io error, offset=0xfffc0014
> > in at91rm92_uart_read, io error, offset=0xfffc0014
> > in at91rm92_uart_read, io error, offset=0xfffc0010
> > in at91rm92_uart_read, io error, offset=0xfffc0014
> > in at91rm92_uart_read, io error, offset=0xfffc0014
> > in at91rm92_uart_read, io error, offset=0xfffc0014
> > in at91rm92_uart_read, io error, offset=0xfffc0014
> > in at91rm92_uart_read, io error, offset=0xfffc0014
> > in at91rm92_uart_read, io error, offset=0xfffc0014
> > in at91rm92_uart_read, io error, offset=0xfffc0014
> > ...
> > And so on. I'm running skyeye-1.2.3, compiled from source, in Debian
> > 2.6.18-4-686. Any idea?
> >
> > Thanks in advance
> >
> >
> >
> > _______________________________________________
> > Skyeye-developer mailing list
> > Skyeye-developer at lists.gro.clinux.org
> > http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
> >
> >
>
>
> --
> www.skyeye.org
>
> _______________________________________________
> Skyeye-developer mailing list
> Skyeye-developer at lists.gro.clinux.org
> http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.gro.clinux.org/pipermail/skyeye-developer/attachments/20070717/4e6bddab/attachment-0001.htm