[Skyeye-developer] Problems with testsuite-2.2 for at91rm9200

[Jesus Lopez]

Hello,

I'm new to skyeye. I'm trying to run the example in
skyeye-testsuite-2.2/linux/at91rm9200/2.6.x/
but kernel doesn't boot and it shows hundreds of errors:

desktop-linux:~/arm9/misc/skyeye/skyeye-testsuite-2.2/linux/at91rm9200/2.6.x#
skyeye -e vmlinux -c skyeye.conf
arch: arm
cpu info: armv4, arm920t, 41009200, ff00fff0, 2
mach info: name at91rm92, mach_init addr 0x80682b0
uart_mod:0, desc_in:, desc_out:, converter:
SKYEYE: use arm920t mmu ops
Loaded RAM   ./initrd.img
exec file "vmlinux"'s format is elf32-little.
load section .init: addr = 0xc0008000  size = 0x00018000.
load section .text: addr = 0xc0020000  size = 0x0013e14c.
load section __ex_table: addr = 0xc015e150  size = 0x000009f8.
not load section .pci_fixup: addr = 0xc015eb48  size = 0x00000000 .
not load section __ksymtab: addr = 0xc015eb48  size = 0x00000000 .
not load section __ksymtab_gpl: addr = 0xc015eb48  size = 0x00000000 .
not load section __kcrctab: addr = 0xc015eb48  size = 0x00000000 .
not load section __kcrctab_gpl: addr = 0xc015eb48  size = 0x00000000 .
load section __param: addr = 0xc015eb48  size = 0x00000078.
load section .data: addr = 0xc0160000  size = 0x00027bd0.
not load section .bss: addr = 0xc0187be0  size = 0x00012ba8 .
not load section .comment: addr = 0x00000000  size = 0x0000188a .
not load section .debug_abbrev: addr = 0x00000000  size = 0x0005b24d .
not load section .debug_info: addr = 0x00000000  size = 0x00fd0eab .
not load section .debug_line: addr = 0x00000000  size = 0x000cb75e .
not load section .debug_pubnames: addr = 0x00000000  size = 0x00011cdf .
not load section .debug_str: addr = 0x00000000  size = 0x00042d28 .
not load section .debug_aranges: addr = 0x00000000  size = 0x00003820 .
not load section .debug_frame: addr = 0x00000000  size = 0x00035044 .
not load section .debug_ranges: addr = 0x00000000  size = 0x00009b08 .
start addr is set to 0xc0008000 by exec file.
in at91rm92_uart_read, io error, offset=0xfffc0014
in at91rm92_uart_read, io error, offset=0xfffc0014
in at91rm92_uart_read, io error, offset=0xfffc0014
in at91rm92_uart_read, io error, offset=0xfffc0014
in at91rm92_uart_read, io error, offset=0xfffc0014
in at91rm92_uart_read, io error, offset=0xfffc0014
in at91rm92_uart_read, io error, offset=0xfffc0014
in at91rm92_uart_read, io error, offset=0xfffc0014
in at91rm92_uart_read, io error, offset=0xfffc0014
in at91rm92_uart_read, io error, offset=0xfffc0014
in at91rm92_uart_read, io error, offset=0xfffc0010
in at91rm92_uart_read, io error, offset=0xfffc0014
in at91rm92_uart_read, io error, offset=0xfffc0014
in at91rm92_uart_read, io error, offset=0xfffc0014
in at91rm92_uart_read, io error, offset=0xfffc0014
in at91rm92_uart_read, io error, offset=0xfffc0014
in at91rm92_uart_read, io error, offset=0xfffc0014
in at91rm92_uart_read, io error, offset=0xfffc0014
...
And so on. I'm running skyeye-1.2.3, compiled from source, in Debian
2.6.18-4-686. Any idea?

Thanks in advance
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.gro.clinux.org/pipermail/skyeye-developer/attachments/20070717/0c080594/attachment.htm