[Skyeye-developer] Help me test the skyeye-v1.2_Rel_gdb

[kang shuo]

I have built the package with gdb-6.4 successfully. When I run
testcase of Skyeye,
there is a segmentation fault in utils/debugger/skyeye2gdb.c:153:
       if (current_reg_type->fetch_register) {

It seems current_reg_type is NULL pointer. After I workaround this
issue and go on use gdbskyeye to run 2410 testcase , it will hang. And
at91 testcase seems no problem. The following is the output mesage:

ksh at ksh:~/cvs/skyeye/testsuite2/s3c2410/2.4.18>
/home/ksh/tmp/gdb-6.4/gdb/gdbskyeye vmlinux
GNU gdb 6.4
Copyright 2005 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "--host=i686-pc-linux-gnu --target=arm-elf"...tar
(gdb) tar skyeye
arch: arm
cpu info: armv4, arm920t, 41009200, ff00fff0, 2
mach info: name s3c2410x, mach_init addr 0x8200fe0
ethmod num=1, mac addr=0:4:3:2:1:f, hostip=10.0.0.1
tapif_init:open: Permission denied
-----------------------------------------------------------
NOTICE: you should be root at first !!!
NOTICE: you should inmod linux kernel net driver tun.o!!!
NOTICE: if you don't make device node, you should do commands:
NOTICE:    mkdir /dev/net; mknod /dev/net/tun c 10 200
NOTICE: now the net simulation function can not support!!!
NOTICE: Please read SkyEye.README and try again!!!
-----------------------------------------------------------
SKYEYE: use arm920t mmu ops
Loaded RAM   ./initrd.img
(gdb) lo
Loading section .init, size 0xf000 lma 0xc0008000
Loading section .text, size 0xe246c lma 0xc0017000
Loading section __ex_table, size 0x978 lma 0xc00f9470
Loading section .data, size 0xe3e3 lma 0xc00fa000
Start address 0xc0008000, load size 1049031
Transfer rate: 10505847 bits/sec, 511 bytes/write.
(gdb) r
Starting program: /home/ksh/cvs/skyeye/testsuite2/s3c2410/2.4.18/vmlinux

################################################

On 1/25/07, teawater <teawater at gmail.com> wrote:
> Hi guys,
>
> Attachment is the gdbskyeye that base on skyeye-v1.2_Rel. Please help
> me test it.
> Following is how to compile it with GDB-6.4.
> tar vxjf gdb-6.4.tar.bz2
> cp skyeye-v1.2_Rel_gdb.tar.bz2 gdb-6.4/
> cd gdb-6.4
> tar vxjf skyeye-v1.2_Rel_gdb.tar.bz2
> cd skyeye-v1
> make patchgdb6.4
> cd ..
> ./configure --target=arm-elf
> make
> make install
>
> thanks,
> teawater
>
>
> _______________________________________________
> Skyeye-developer mailing list
> Skyeye-developer at lists.gro.clinux.org
> http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
>
>
>
>