[Skyeye-developer] [ SkyEye Release ] Skyeye v1.21 is released.

[andy wang]

Thanks Michael,
That is really cool!

Regards,
Andy

On 2/14/07, kang shuo <blackfin.kang at gmail.com> wrote:
> I think the simulation of bf537  should be finish in this week end or
> the end of this month. We will add bf537 simulation in the release of
> this month. More bugs in blackfin simulation wll be fixed.
>
> -- Thanks
> -- Michael.Kang
> On 2/15/07, andy wang <ypwangreg at gmail.com> wrote:
> > Thanks, Michael!
> >
> > Is there possible way to support BF537 as well ?
> >
> > Regards,
> > Andy
> >
> > On 2/12/07, kang shuo <blackfin.kang at gmail.com> wrote:
> > > You need to unselect some options on "make menuconfig" of blackfin
> > > uclinux. You can use R0504_linux_config file in the attachement as
> > > your kernel config file .
> > > Use R0504_user_config file in the attachment as your user application
> > > config file.
> > >
> > > -- Thanks
> > > -- Michael.Kang
> > >
> > > On 2/12/07, andy wang <ypwangreg at gmail.com> wrote:
> > > > Hi, Kang
> > > >
> > > > It's very nice to see the blackfin active again.
> > > >
> > > > After I compiled the skyeye on the cygwin and tested with R0504, it
> > > > stopped after outputting following message and cpu is going to 100%...
> > > >
> > > > I've checked with common output and found the next output would be
> > > > network driver. If I want to debug with skyeye and would like to see
> > > > where it go to infinite loop, could you please give me some
> > > > suggestions and advice?
> > > >
> > > > Regards,
> > > > Andy
> > > >
> > > > $ ./skyeye.exe -e linux-bf533
> > > > arch: blackfin
> > > > uart_mod:0, desc_in:, desc_out:
> > > > begin init emulator()
> > > > exec file "linux-bf533"'s format is elf32-little.
> > > > load section .text: addr = 0x00001000  size = 0x000d8500.
> > > > load section .init: addr = 0x000d9500  size = 0x0000d0a0.
> > > > load section .text_l1: lma = 0x000e65a0 (vma = 0xffa00000)  size = 0x000000cc.
> > > > not load section .data_l1: addr = 0xff800000  size = 0x00000000 .
> > > > load section .data: addr = 0x000e666c  size = 0x0002c9e8.
> > > > not load section .bss: addr = 0x00113060  size = 0x0000d4c4 .
> > > > not load section .comment: addr = 0x00000000  size = 0x00003162 .
> > > > load section .romfs: addr = 0x00120524  size = 0x00800000.
> > > > start addr is set to 0x00001000 by exec file.
> > > >  ↑Linux version 2.6.12.1-BFIN-2005R4 (root at sevens) (gcc version 3.4.4
> > > > (Blackfin 05R4 20051205)) #1 Wed Jan 11 15:33:21 C
> > > > ST 2006
> > > > Blackfin support (C) 2004 Analog Devices, Inc.
> > > > ADSP-BF533 Rev. 0.0
> > > > Warning: Unsupported Chip Revision ADSP-BF533 Rev. 0.0 detected
> > > > uClinux/BF533
> > > > Blackfin uClinux support by blackfin.uclinux.org
> > > > Processor Speed: 110 MHz core clock and 22 Mhz System Clock
> > > > Board Memory: 128MB
> > > > Memory map:
> > > >   text = 0x001000-0x0d9500
> > > >   data = 0x0e666c-0x113054
> > > >   bss  = 0x113060-0x120524
> > > >   rootfs = 0x7700000-0x7f00000
> > > >   stack = 0x0e8000-0x0ea000
> > > > Instruction Cache Enabled
> > > > Data Cache Enabled (write-through)
> > > > Hardware Trace Enabled
> > > > Built 1 zonelists
> > > > Kernel command line:
> > > > Configuring Blackfin Priority Driven Interrupts
> > > > PID hash table entries: 256 (order: 8, 4096 bytes)
> > > > Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
> > > > Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
> > > > Physical pages: 3c00
> > > > Memory available: 59648k/130150k RAM, (49k init code, 865k kernel
> > > > code, 231k data, 69632k dma)
> > > > Blackfin Scratchpad data SRAM: 4 KB
> > > > Blackfin DATA_A SRAM: 16 KB
> > > > Blackfin DATA_B SRAM: 16 KB
> > > > Security Framework v1.0.0 initialized
> > > > Capability LSM initialized
> > > > Mount-cache hash table entries: 512
> > > >
> > > > _______________________________________________
> > > > Skyeye-developer mailing list
> > > > Skyeye-developer at lists.gro.clinux.org
> > > > http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
> > > >
> > >
> > > _______________________________________________
> > > Skyeye-developer mailing list
> > > Skyeye-developer at lists.gro.clinux.org
> > > http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
> > >
> > >
> > >
> >
> > _______________________________________________
> > Skyeye-developer mailing list
> > Skyeye-developer at lists.gro.clinux.org
> > http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
> >
>
> _______________________________________________
> Skyeye-developer mailing list
> Skyeye-developer at lists.gro.clinux.org
> http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
>