[Skyeye-developer] [ SkyEye Release ] Skyeye v1.21 is released.

[kang shuo]

I think the simulation of bf537  should be finish in this week end or
the end of this month. We will add bf537 simulation in the release of
this month. More bugs in blackfin simulation wll be fixed.

-- Thanks
-- Michael.Kang
On 2/15/07, andy wang <ypwangreg at gmail.com> wrote:
> Thanks, Michael!
>
> Is there possible way to support BF537 as well ?
>
> Regards,
> Andy
>
> On 2/12/07, kang shuo <blackfin.kang at gmail.com> wrote:
> > You need to unselect some options on "make menuconfig" of blackfin
> > uclinux. You can use R0504_linux_config file in the attachement as
> > your kernel config file .
> > Use R0504_user_config file in the attachment as your user application
> > config file.
> >
> > -- Thanks
> > -- Michael.Kang
> >
> > On 2/12/07, andy wang <ypwangreg at gmail.com> wrote:
> > > Hi, Kang
> > >
> > > It's very nice to see the blackfin active again.
> > >
> > > After I compiled the skyeye on the cygwin and tested with R0504, it
> > > stopped after outputting following message and cpu is going to 100%...
> > >
> > > I've checked with common output and found the next output would be
> > > network driver. If I want to debug with skyeye and would like to see
> > > where it go to infinite loop, could you please give me some
> > > suggestions and advice?
> > >
> > > Regards,
> > > Andy
> > >
> > > $ ./skyeye.exe -e linux-bf533
> > > arch: blackfin
> > > uart_mod:0, desc_in:, desc_out:
> > > begin init emulator()
> > > exec file "linux-bf533"'s format is elf32-little.
> > > load section .text: addr = 0x00001000  size = 0x000d8500.
> > > load section .init: addr = 0x000d9500  size = 0x0000d0a0.
> > > load section .text_l1: lma = 0x000e65a0 (vma = 0xffa00000)  size = 0x000000cc.
> > > not load section .data_l1: addr = 0xff800000  size = 0x00000000 .
> > > load section .data: addr = 0x000e666c  size = 0x0002c9e8.
> > > not load section .bss: addr = 0x00113060  size = 0x0000d4c4 .
> > > not load section .comment: addr = 0x00000000  size = 0x00003162 .
> > > load section .romfs: addr = 0x00120524  size = 0x00800000.
> > > start addr is set to 0x00001000 by exec file.
> > >  ↑Linux version 2.6.12.1-BFIN-2005R4 (root at sevens) (gcc version 3.4.4
> > > (Blackfin 05R4 20051205)) #1 Wed Jan 11 15:33:21 C
> > > ST 2006
> > > Blackfin support (C) 2004 Analog Devices, Inc.
> > > ADSP-BF533 Rev. 0.0
> > > Warning: Unsupported Chip Revision ADSP-BF533 Rev. 0.0 detected
> > > uClinux/BF533
> > > Blackfin uClinux support by blackfin.uclinux.org
> > > Processor Speed: 110 MHz core clock and 22 Mhz System Clock
> > > Board Memory: 128MB
> > > Memory map:
> > >   text = 0x001000-0x0d9500
> > >   data = 0x0e666c-0x113054
> > >   bss  = 0x113060-0x120524
> > >   rootfs = 0x7700000-0x7f00000
> > >   stack = 0x0e8000-0x0ea000
> > > Instruction Cache Enabled
> > > Data Cache Enabled (write-through)
> > > Hardware Trace Enabled
> > > Built 1 zonelists
> > > Kernel command line:
> > > Configuring Blackfin Priority Driven Interrupts
> > > PID hash table entries: 256 (order: 8, 4096 bytes)
> > > Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
> > > Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
> > > Physical pages: 3c00
> > > Memory available: 59648k/130150k RAM, (49k init code, 865k kernel
> > > code, 231k data, 69632k dma)
> > > Blackfin Scratchpad data SRAM: 4 KB
> > > Blackfin DATA_A SRAM: 16 KB
> > > Blackfin DATA_B SRAM: 16 KB
> > > Security Framework v1.0.0 initialized
> > > Capability LSM initialized
> > > Mount-cache hash table entries: 512
> > >
> > > _______________________________________________
> > > Skyeye-developer mailing list
> > > Skyeye-developer at lists.gro.clinux.org
> > > http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
> > >
> >
> > _______________________________________________
> > Skyeye-developer mailing list
> > Skyeye-developer at lists.gro.clinux.org
> > http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
> >
> >
> >
>
> _______________________________________________
> Skyeye-developer mailing list
> Skyeye-developer at lists.gro.clinux.org
> http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
>