[Skyeye-developer] Working 2.6 kernel .config?

[Stanislav Meduna]

Hi,

could please anyone who was able to get any recent 2.6 kernel
(i.e. newer than the 2.6.12 in the testsuite) running with
current (svn) SkyEye mail me the .config file?

Regardless of what I tweak in the skyeye.conf or kernel config
I am unable to get past

big_endian is false.
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x8062350
uart_mod:0, desc_in:, desc_out:, converter:
SKYEYE: use arm7100 mmu ops
Loaded ROM   ./romfs.img
exec file "../uClinux-dist-armie/linux-2.6.x/linux"'s format is
elf32-little.
load section .init: addr = 0x01008000  size = 0x00010000.
load section .text: addr = 0x01018000  size = 0x000f593c.
not load section .pci_fixup: addr = 0x0110e000  size = 0x00000000 .
not load section .rio_route: addr = 0x0110e000  size = 0x00000000 .
not load section __ksymtab: addr = 0x0110e000  size = 0x00000000 .
not load section __ksymtab_gpl: addr = 0x0110e000  size = 0x00000000 .
not load section __ksymtab_unused: addr = 0x0110e000  size = 0x00000000 .
not load section __ksymtab_unused_gpl: addr = 0x0110e000  size =
0x00000000 .
not load section __ksymtab_gpl_future: addr = 0x0110e000  size =
0x00000000 .
not load section __kcrctab: addr = 0x0110e000  size = 0x00000000 .
not load section __kcrctab_gpl: addr = 0x0110e000  size = 0x00000000 .
not load section __kcrctab_unused: addr = 0x0110e000  size = 0x00000000 .
not load section __kcrctab_unused_gpl: addr = 0x0110e000  size =
0x00000000 .
not load section __kcrctab_gpl_future: addr = 0x0110e000  size =
0x00000000 .
load section __param: addr = 0x0110e000  size = 0x000000f0.
load section .data: addr = 0x01110000  size = 0x0001ff30.
not load section .bss: addr = 0x0112ff40  size = 0x0000bfe4 .
not load section .comment: addr = 0x00000000  size = 0x00001572 .
call ARMul_InitSymTable,kernel filename is
../uClinux-dist-armie/linux-2.6.x/linux.
start addr is set to 0x01008000 by exec file.


My skyeye.conf:

cpu: arm7tdmi
mach: at91
mem_bank: map=M, type=RW, addr=0x00000000, size=0x00004000
mem_bank: map=M, type=RW, addr=0x01000000, size=0x00400000
mem_bank: map=M, type=R,  addr=0x01400000, size=0x00400000, file=./romfs.img
mem_bank: map=M, type=RW, addr=0x02000000, size=0x00400000
mem_bank: map=M, type=RW, addr=0x02400000, size=0x00008000
mem_bank: map=M, type=RW, addr=0x04000000, size=0x00400000
mem_bank: map=I, type=RW, addr=0xf0000000, size=0x10000000


Preferably with arm7tdmi/at91, but anything that actually
runs will probably help me.

The kernel I am trying is the uClinux's 2.6.19-uc1.
The 2.4 kernel works fine...

Thanks
-- 
                                     Stano