[Skyeye-developer] about ping 10.0.0.2

[Michael.Kang]

On 8/7/07, 梁雪红 <liangxuehong_1999 at 163.com> wrote:
> hello,I couldn't ping successfully between host and uclinux on skyeye,i did
> like this . when i set up uclinux on skyeye,i use "/bin/ifconfig eth0 up
> 10.0.0.2" , "route add default gw 10.0.0.1 eth0 " .And there are tap0 on my
> host.but when i ping 10.0.0.2 ,it displayed like this
> "ING 10.0.0.5 (10.0.0.5) 56(84) bytes of data.
> From 10.0.0.1 icmp_seq=1 Destination Host Unreachable
Sorry , I have not understand your network environment. I assume there
is totally two network interface.
tap0 on your host 10.0.0.1
eth0 on SkyEye 10.0.0.2
Is it right?Could you describe it in more detail?
>
> --- 10.0.0.5 ping statistics ---
> 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms"
>     I don't know what happened .Because i can ping successfully one month
> ago. then i find while i ping 10.0.0.2 in my host,skyeye display "read data
> overflow",and i found that io->PSTOP=0 io->PSTART=0 io->CURR=0 io->BNRY=0 .I
> don't know why .I guess perhaps the skyeye-ne2k driver didn't call open
> method.
> who can help me ?I use skyeyeye-v1.2 .
Maybe the following URL is useful for you...
http://lists.gro.clinux.org/pipermail/skyeye-developer/2007-July/001442.html
> Thanks !
>
>
> ________________________________
>  《大 话 西 游 3》 首 届 玩 家 见 面 会 即 将 在 广 州 召 开！敬 请 关 注 >>
> _______________________________________________
> Skyeye-developer mailing list
> Skyeye-developer at lists.gro.clinux.org
> http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
>
>


-- 
www.skyeye.org