FW: [Skyeye-developer] Not able to run Uboot for EP7312

[kang shuo]

Can you send your source code of u-boot and compile method to me? I
like to find some cause of the issue.

- Thanks
- Michael.Kang
On 10/14/06, Ravi KK <ravikk at huawei.com> wrote:
> Hi Mr. Kang,
> Thank you for your response.
> I started debugging, and what I find is that
> Sim_resume() function, skyeye is failing at the following line of code.
> State->Reg[15] = ARMul_DoProg ( state );
> Any idea why is it happening like this ?
> Thanx
> Ravi
>
> -----Original Message-----
> From: skyeye-developer-bounces at lists.gro.clinux.org
> [mailto:skyeye-developer-bounces at lists.gro.clinux.org] On Behalf Of kang
> shuo
> Sent: Saturday, October 14, 2006 7:36 AM
> To: Skyeyee&lt, ehd8g(i.d, 6eh!(
> Subject: Re: [Skyeye-developer] Not able to run Uboot for EP7312
>
> I guess maybe some register is not simulated in skyeye correctly.  You
> can try to use skyeye 0.98 version to debug elf format of u-boot.
> Probabely you can find some cause of it.
>
> - Thanks
> - Michael.Kang
> On 10/13/06, Ravi KK <ravikk at huawei.com> wrote:
> >
> >
> >
> >
> > Hi all,
> >
> > Iam very new for skyeye and facing the following problem.
> >
> > Please give me some suggestions to resolve this.
> >
> >
> >
> > Installed skyeye-1.2-RC8 on linux and then downloaded the following skyeye
> > config file from internet WIKI for EP7312
> > ======================================================
> >
> > #skyeye config file for uboot
> >
> > cpu: arm720t
> >
> > mach: ep7312
> >
> > mem_bank: map=I, type=RW, addr=0x80000000, size=0x00010000 #skyeye for
> uboot
> > flash 16M bank 1
> >
> > mem_bank: map=M, type=RW, addr=0x00000000, size=0x01000000,
> > file=./u-boot.bin,boot=yes #skyeye for uboot sdram 16m bank 1
> >
> > mem_bank: map=M, type=RW, addr=0xc0000000, size=0x01000000
> >
> >
> >
> > Also have compiled uboot.bin as per WIKI
> > ======================================================
> >
> > Following is the log I get when I run skyeye and then it hangs.
> >
> > Please let me know if U have any suggestions
> > ========================================================
> >
> > linux:/home/demo/skyeye/skyeye-v1/binary #
> > linux:/home/demo/skyeye/skyeye-v1/binary # ./skyeye
> >
> > SKYEYE: If you have ELF kernel file, please use -e option to indicate your
> > ELF format kernel filename
> >
> > SKYEYE: If you only have kernel binary image, you should put the filename
> of
> > kernel binary image in skyeye.conf file
> >
> > arch: arm
> >
> > cpu info: armv4, arm720t, 41807200, ffffff00, 1 mach info: name ep7312,
> > mach_init addr 0x805e1e8
> >
> > SKYEYE: use arm7100 mmu ops
> >
> > Loaded RAM   ./u-boot.bin
> >
> >
> >
> > -- Ravi KK
> > _______________________________________________
> > Skyeye-developer mailing list
> > Skyeye-developer at lists.gro.clinux.org
> > http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
> >
> >
> >
>
> _______________________________________________
> Skyeye-developer mailing list
> Skyeye-developer at lists.gro.clinux.org
> http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
>
>
>
> _______________________________________________
> Skyeye-developer mailing list
> Skyeye-developer at lists.gro.clinux.org
> http://lists.gro.clinux.org/cgi-bin/mailman/listinfo/skyeye-developer
>