[Skyeye-developer] Not able to run Uboot for EP7312

[Ravi KK]

Hi all,

Iam very new for skyeye and facing the following problem. 

Please give me some suggestions to resolve this.

 

Installed skyeye-1.2-RC8 on linux and then downloaded the following skyeye
config file from internet WIKI for EP7312
======================================================

#skyeye config file for uboot

cpu: arm720t

mach: ep7312

mem_bank: map=I, type=RW, addr=0x80000000, size=0x00010000 #skyeye for uboot
flash 16M bank 1

mem_bank: map=M, type=RW, addr=0x00000000, size=0x01000000,
file=./u-boot.bin,boot=yes #skyeye for uboot sdram 16m bank 1

mem_bank: map=M, type=RW, addr=0xc0000000, size=0x01000000

 

Also have compiled uboot.bin as per WIKI
======================================================

Following is the log I get when I run skyeye and then it hangs.

Please let me know if U have any suggestions
========================================================

linux:/home/demo/skyeye/skyeye-v1/binary #
linux:/home/demo/skyeye/skyeye-v1/binary # ./skyeye

SKYEYE: If you have ELF kernel file, please use -e option to indicate your
ELF format kernel filename

SKYEYE: If you only have kernel binary image, you should put the filename of
kernel binary image in skyeye.conf file

arch: arm

cpu info: armv4, arm720t, 41807200, ffffff00, 1 mach info: name ep7312,
mach_init addr 0x805e1e8

SKYEYE: use arm7100 mmu ops

Loaded RAM   ./u-boot.bin

 

-- Ravi KK

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.gro.clinux.org/pipermail/skyeye-developer/attachments/20061013/af2a2240/attachment-0001.htm